MendelMax 1.5 Printed Plastic Parts
RAMPS1.4 + A4988 Stepstick Drivers
MK2 Heat bed with Fiber Glass Insulated Wire
NEMA17 Stepper Motors (40Oz/in) - 5pcs
Aluminium shaft coupler for Z-Axis threaded rod - 2pcs
2020 Aluminium Extrusion (4pcs of 300mm,4pcs of 340mm,6pcs of 420mm)
GT2 Belt and Aluminium Pulley for X & Y Axis
SCV8UU Bearing Housing for Print Platform support - 4pcs
LM8UU Bearing (8pcs)
608z Bearing (5pcs)
MDF (9mm thickness) Print Platform
All Metal Hot End (0.4mm nozzle diameter. 1.75mm filament)
8mm 304 Stainless Steel Smooth Rod for X, Y & Z Axis
M8 threaded rod for Z Axis
12VDC, 20A Power Supply. 110V/240V Switchable
Mechanical Endstop - 3pcs
All bolts, nuts, wiring and miscellaneous

This kit include everything required to build a MendelMax except for the following 2 items :

Not included :
1. Glass for print bed
Shipping a fragile piece of glass is risky.  You can get the local glass shop to cut a piece of 200mm x 200mm x 5mm glass.  Apply kapton tape on the surface and place it on top of the heat bed.  Get a roll of 50mm wide kapton tape. You may need to replace the kapton print surface from time to time. 

2. AC power cord
Different countries uses different AC power plug. Get one that is compatible with your AC socket from the local store.