CF to IDE converter - 44 pin male - TRUE IDE mode - Directly replace 2.5 inch IDE hard drive - Supports IDE Master and Slave - Support CompactFlashTM cards (Type I) - Transparent to the operating system and does not require any drivers - The CF card can be the primary bootable device containing the OS and application
Mini Vertical Converter Board for IDE Device to SATA MotherBoard - Attaches this Mini Dangle board to the back of all types of ATAPI, ATA/133, ATA/100, ATA/66, ATA/33, EIDE and IDE storage devices (such as Hard Disk, DVD, DVD-RAM, CD-ROM, CD-RW, MO, ….) and make them become new Serial ATA Devices and meet SATA standard
The SLOA012 Mountable 2.5 Inch IDE To 3.5 Inch IDE Hard Driver Adapter is transparent to the operating system and does not require any drivers. With this adapter, the computer will identify the 2.5 inch laptop hard disk driver as a standard 40-Pin IDE desktop computer hard disk. As such, you can install any operating systems and 2.5 inch hard disk driver will be bootable in desktop computer.
Add 1 Special External SATA (not eSATA!!!) Port and 1 Standard Internal SATA Port on your PC System to Support Mobile storage devices to transfer over 200 cm distance - PCI interface - Fully compliant with Serial ATA 1.5G specifications - Supports 64bit / 32bit Windows Vista
ST-308 - Convert IDE port (40Pin or 44Pin) to support bootable CF Card - Supports 40 and 44 pin IDE - Support CompactFlash (Type I,II) or IBM Microdrive - Transparent to the operating system and does not require any drivers - The CF card can be the primary bootable device containing the OS and application - Supports jumper for master and slave setting - Push bottom ejector on board - Powered by 4 pin floppy connector or 44 pin IDE Port
Mini Vertical Bridge Board for SATA Device to IDE MotherBoard - Attaches this Mini size Dangle board to the back of all types of Serial ATA Devices (such as Hard Disk, DVD, DVD-RAM, CD-ROM, CD-RW, MO, ….)and make them become IDE Device to work with IDE host Controller.
4 Ports SATA/SAS Host to External SFF-8088 Low Profile PCI Adapter - Ideal Low Profile PCI Adapter that converts onboard Internal 4Ports SAS or SATA to mini-SAS SFF-8088 connector for external connection!
ST307 - CF to IDE 40 female pin converter - Support CompactFlash cards (Type I, II) or a IBM Microdrive - Transparent to the operating system and does not require any drivers - The CF card can be the primary boot device containing the OS and application
CompactFlash CF to 1.8 inch Micro SATA Drive Adapter with Housing Frame - SATA2 3Gb/s transfer rate Adapter Board with 13Pin Micro SATA (Signals and Power) male connector
ST-307P4 - CF to IDE-44pin female converter - Supports IDE Master and Slave - Support Compact Flash cards (Type I,II) or a IBM Microdrive - Transparent to the operating system and does not require any drivers - The CF card can be the primary bootable device containing the OS and application
Toshiba 1.8 inch ZIF to 2.5 inch IDE connector) converter connector only for Toshiba 1.8 inch hdd with ZIF connector - Need to read/write or retrieve data from the small 1.8 inch Toshiba hard drive that is inside you Apple iPOD and small Notebook computers? The new Toshiba 1.8 inch ZIF to 2.5 inch IDE connector from Addonics is the perfect tool. It will enable you to attach the small 1.8 inch hard drive, just like a 2.5 inch IDE hard drive, to any computer.
This Addonics Hybrid Port converter instantly adds to any Desktop system an eSATA USB Hybrid Port (EUHP), the same Hybrid port commonly found on many new generations of Notebook computers. The Addonics Hybrid Port converter can be easily added via a PCI slot
Enable up to two CompactFlash (CF) storage cards to use TRUE IDE mode. Directly replace 2.5 inch IDE hard drive (for example: Laptop PC or Notebook PC).
IDE Device to USB2.0 Device converter - USB Type B upstream connector and USB 5Pin Pin header both on board - USB2.0 High transfer rate of 480Mbps - Compatible with Ultra ATA 133
The SATA to SD Adapter is transparent to the operating system and does not require any drivers. With this adapter, the host PC will identify the inserted SD card as a standard SATA hard disk. As such, you can install any operating systems and the SD card will be bootable.
Hybrid Port converter - This Addonics Hybrid Port converter instantly adds to any Desktop system an eSATA USB Hybrid Port (EUHP), the same Hybrid port commonly found on many new generations of Notebook computers. The Addonics Hybrid Port converter can be easily added via a PCI slot or the 3.5 inch drive bay. Once the USB, SATA and floppy power connectors on Hybrid Port are connected, the installation is complete.
Flash SATA Drive - Connect any CF (Compact Flash) card to SATA and use it as master/slave hard drive - Bridge Board with front Bay Bracket (floppy size, Ivory Color)
The SLSA5002 Dual SD to SATA Adapter is transparent to the operating system and does not require any drivers. With this adapter, the host PC will identify the inserted SD card as a standard SATA hard disk. As such, you can install any operating systems and the SD card will be bootable.
Compact Flash to 2.5 inch SATA Disk Bridge Board (With 2.5 inch HDD Frame) - Support CompactFlash cards (Type I, II) or IBM Microdrive - Transparent to the operating system and does not require any drivers - The CF card can be the primary bootable device containing the OS and application - Includes 2.5 “ hard drive frame to secure the device in your laptop - Support any size of CF memory card up to 2TB
This new eSATAp CFast Memory Adapter is the ideal solution for connecting any CFast media to eSATA or the new eSATA USB Hybrid Port. By using the optional Addonics eSATA - USB adapter, the CFast media can also be accessed via the ubiquitous USB port found on many systems.
Convert two SATA 2.5 inch Solid State Disks or HDDs as an Extremely High Performance and High Capacity Hardware RAID 0 Disk array that will fit into standart 3.5 inch Form Factor
ST-138 - H/W RAID Dual-CF 2.5'' SATA Flash Disk Adapter - Supports Raid 0,1 - Sata Data, Sata power and USB ports to connect to PC - Easy RAID setting through onboard Slide Switch - SATA and USB Hot-plug support - Support DMA and UDMA mode - Support two Type I and II CF - No driver required on Windows and Mac - Includes 2.5'' hard drive frame to use like a standard 2.5'' HDD
10Gbps USB3.1 1x USB-C + 1x USB-A 2Ports Low Profile PCIe x4 Host Adapter - Fast USB3.1 SuperSpeed+ 10Gbps 1x USB-C 1x USB-A 2Ports in Low Profile PCIe x4 Lane Host Adapter to provide USB bus high power USB-C 5V3A and USB-A 5V2A, total 5V5A power
AD2SAHDCF - H/W RAID Dual-CF 2.5'' SATA Flash Disk Adapter - Supports Raid 0,1 - Sata Data, Sata power and USB ports to connect to PC - Easy RAID setting through onboard Slide Switch - SATA and USB Hot-plug support - Support DMA and UDMA mode - Support two Type I and II CF - No driver required on Windows and Mac - Includes 2.5'' hard drive frame to use like a standard 2.5'' HDD
CFAST to 2.5 SATA Disk Bridge Board with 2.5 Frame - Best Solution that Convert Fast Speed CFAST to a low power and high performance and no noise 2.5 inch SATA Hard Drive!
CFAST to 1.8 inch Micro SATA Drive Adapter with Housing Frame - Convert Fast speed CFAST to a High Performance and Low Power 1.8 inch Micro SATA Hard Drive for Netbook or Mobile use!
CFAST to SATA Adapter with 3.5 inch Frame - Best Solution that Convert Fast Speed CFAST to a low power and high performance and no noise 3.5 inch SATA Hard Drive !
HPM-XU port multiplier - Comes with a built-in eSATA and the lastest USB 3.0 interface - Using the 5-Port HPM-XU, you can connect as many as five SATA hard drives to any system via just a single eSATA or USB cable. The five hard drives can be set up to appear as five individual drives, just like connecting through a USB hub, or appear as a single RAID volume
ATAPI (IDE) to SCSI Converter - Having trouble finding a SCSI storage device? Getting a sticker shock from the high price tag of the SCSI drive? The Addonics ATAPI to SCSI converter is the answer. With this converter, common low cost ATAPI devices such as DVD-R/RW, CDRW, DVD, CD-ROM, ZIP or MO drives become SCSI devices. There is no driver to install and the converter works practically with any OS. Supporting Ultra LVD80 SCSI standard, the ATAPI to SCSI converter aslo ensures maximum performance of the fastest ATAPI drive while minimizing any impact on the performance of other devices in the SCSI chain.
שנה אחריות - הזמנה מיוחדת לא ניתנת לביטול - אספקה תוך חודש מהזמנה
The IDE DigiDrive PRO is internal Flash memory reader/writer. Fits into standard 3.5" drive bay. Enables all any memory card to be used as removable media with hot swap capability. Supports all IDE modes including UDMA6 (133MB/s) data transfer. Can also be can be used as bootable device. No driver needed. Upgradeable firmware. 4 slots for Compact Flash (CF), Secure Digital (SD) and SDHC (SD 2.0), Multi Media Card (MMC), Memory Stick (MS)
שנה אחריות
₪1311/1338
שאלות נפוצות ותשובות:
האם אפשר לבוא לקחת הזמנה ישירות מכם ?
כן. כמובן. בשלב סיום ההזמנה תוכלו לבחור באופציה "בא לקחת". לאחר קבלת ההזמנה באתר אנחנו מכינים עבורכם את ההזמנה וכשהיא מוכנה נקרא לכם לבוא לאספה.
האם אפשר להזמין ללא מתן פרטי אשראי ?
כמובן. המערכת לא מחייבת אתכם להזין פרטי אשראי. את פרטי האשראי נבקש מכם טלפונית מאוחר יותר. לעיתים (במקרה של מוצר נדיר או יקר במיוחד) עוד לפני שנזמין את הפריטים עבורכם ולעיתים רק כשיגיעו אלינו
מתי אתם מחייבים את כרטיס האשראי שלי ?
אנחנו מחייבים את כרטיס האשראי רק כשכל המוצרים שהזמנתם הגיעו אלינו ולא במעמד ההזמנה עצמו. אנחנו לא מחייבים אוטומטית !!!
אפשר לבוא ולהתרשם ולהזמין אצלכם במשרד ?
לא ממש. אין לנו מלאי. אמנם יש לנו מוצרים מסויימים במלאי אבל עם מבחר של כ 20000 מוצרים אי אפשר להחזיק מלאי. אין אצלנו תצוגה במשרד והכי קל ליצור הזמנה מהמחשב שלכם.
המחירים באתר נכונים ? מעודכנים ? מה קורה אם טעיתם במחיר ?
מחירי מוצרים מתעדכנים יום יום, מעל 100 מוצרים עוברים עדכון מדי יום. לעיתים בגלל שגיאות הקלדה או טעויות במחירוני יבואנים קורות טעויות. במקרה של טעות נודיעכם וניתן לכם אפשרות לבטל/להחליף או לבחור לשלם את המחיר הנכון אך איננו "מפצים" כי אין לנו את המרווח לעשות זאת.